Principle of Screw Ultrasonic Cleaning Machine
Browse Volume:689 Classify:Support
The screws are too small to clean. So now we have a screw ultrasonic cleaner, which is specially designed to clean screws. However, many people do not know much about the screw ultrasonic cleaner. Here is an introduction
Working principle of ultrasonic cleaning machine for lower screws.
The ultrasonic cleaner relies on the transducer and ultrasonic frequency source to convert the sound energy into kinetic energy, so that the cleaning solution in the cleaning tank can realize ultrasonic vibration, thus generating microbubbles. The microbubbles, regardless of impact and vibration, will destroy and peel the dirt on the surface of the cleaner. Then the dirt on the surface of the cleaner can strengthen the role of the chemical cleaner under the accelerated mixing and diffusion, and gradually dissolve the dirt. Therefore, the ultrasonic cleaning machine is suitable for any place where the liquid infiltration and sound field reach, especially for cleaning parts with very complex external shapes. The ultrasonic cleaner can not only reduce the amount of chemical cleaner, reduce environmental pollution, but also carry out mechanical operation. The ultrasonic cleaning machine is composed of a cleaning tank and an ultrasonic generator. The ultrasonic cleaning tank is made of solid, durable and anti-corrosion stainless steel materials. The ultrasonic generator is connected with the transducer at the bottom of the cleaning tank. After the ultrasonic wave is emitted, the cleaning agent is allowed to vibrate with high frequency to thoroughly clean the cleaning substance.
Screw ultrasonic cleaning machine — The cycle process of screw ultrasonic cleaning machine
Cavitation process ultrasonic cleaning machine In this process, the internal ultrasonic will carry out high-frequency direction transformation of compression force and pressure reduction more than 20000 times per second. Through this internal dialysis, liquid vacuum nuclear bubbles will be generated. These vacuum nuclear bubbles will impact and peel off the dirt on the surface of the medium under the effect of pressure to achieve precision cleaning. In the direct inflow process, the ultrasonic wave of the ultrasonic cleaner will flow in the direction of sound in the cleaning liquid. Under the action of this direct inflow, the dirt and cleaning liquid can be stirred, and the mixing of the two can accelerate the dissolution of dirt, so that the dirt can be removed. Acceleration process The acceleration process of the ultrasonic cleaning machine is the acceleration driven by the liquid particles generated by the equipment. In general, the cavitation process effect of high-frequency ultrasonic cleaning machine is not obvious. At this time, it needs to rely on the acceleration process to impact the dirt particles to achieve ultra precision cleaning.
The above is the introduction of the working principle and working process of the screw ultrasonic cleaning machine. After you see it, you should know something about it. The screw ultrasonic cleaning machine is a very efficient cleaning equipment, and it also has the function of sterilization and anti-corrosion. I hope that the above content can help you.For more information, please contact Granbosonic.
Hello!