In this era of advanced technology, most of the work that needs to be done manually can be mechanized, and so can cleaning. The appearance of small single slot ultrasonic cleaning machine has solved many problems for people and improved work efficiency. The cleaning ability is also strong, and it is a good item worth starting with. The following is a good introduction to the relevant content of the small single tank ultrasonic cleaner.
Brief Introduction of Small Single Tank Ultrasonic Cleaner
Among all cleaning methods, ultrasonic cleaning is the most efficient and effective one. The reason why ultrasonic cleaning can achieve such an effect is closely related to its unique working principle and cleaning method. We know that in production and production, there are many things that need to be cleaned, and there are also many types and links that need to be cleaned, such as removing pollutants from objects, dredging small holes, and the common manual cleaning methods can not meet the requirements for special-shaped objects and hidden parts of objects, even steam cleaning and high-pressure water jet cleaning can not meet the requirements for high cleanliness, and ultrasonic cleaning can also kill bacteria Dissolve organic pollutants, prevent excessive corrosion, etc. Therefore, ultrasonic cleaning is increasingly widely used in various industries.
Introduction to Function and Characteristics of Small Single Tank Ultrasonic Cleaner
Long operation time: continuous automatic operation in large quantities, suitable for cleaning of simple structures and pipe fittings. Galvanized and stainless steel shells can be used. PU spray pipes are equipped inside, and the closed passage. The whole machine is a fully enclosed structure, which is welded with stainless steel or (Fangtong) skeleton. The upper cover of the cleaning machine is a single-layer structure, which is made of 1.2mm thick stainless steel plate, with an external thermal insulation layer to reduce energy consumption.
Good working fluid tank: the fluid tank is a single-layer structure, made of SUS304 stainless steel 1.2mm thick stainless steel plate; The inner part is divided into several areas with a partition board to filter the cleaning solution, precipitate iron filings, filter oil and separate oil; The liquid tank is provided with a water make-up port, a liquid discharge port and an overflow port. The bottom is inclined from both sides to the middle, and the cleaning solution is discharged from the drain port at the bottom of the tank.
Intelligentization: the liquid tank is equipped with a liquid level controller, which will timely remind you to replenish and stop water when the liquid level is abnormal. Emergency shutdown shall be realized under abnormal conditions. Stainless steel electric heater is installed inside the rust proof box to raise the liquid temperature from room temperature to service temperature within 30-60 minutes. The temperature is automatically controlled within the range of 10~90 ℃, manually set and automatically controlled. It is equipped with temperature control instrument for automatic display. The external surface of the tank is covered with insulating cotton to prevent heat emission.
The above is to introduce the knowledge about the small single tank ultrasonic cleaner. I believe you can get some understanding about the ultrasonic cleaner here. The design of small single tank makes the cleaning machine more convenient for manual use, and it is a good product that saves time and labor. I hope it will be helpful to everyone. We are ultrasonic cleaner manufacturer, you can contact us if you are interested.